A while ago I did a review video on the Apneaman Freediving Buoy (Apneautic).
Below I have embedded the video for you to watch, but there is one subject in particular I still wanted to discuss here, since I did not discuss it in depth in the video: the rope. I will keep it short though, and let the video speak for itself.
There are different opinions on what properties the ideal freediving rope should have. Basically there are a couple of main separating criteria: (1) does it float or not; (2) is it 10mm or 12mm thick; and (3) does it stretch a little or the least amount possible.
(1) Whether the line floats or not mostly influences the handling after the dive. I think it is mainly a personal preference whether you find it more convenient to knot it back up and/or put it back into the buoy when it sinks down or comes to the surface after you have pulled up the bottom weight.
(2) The thickness of the line is also a matter of personal preference. I like the rope a bit thicker. It just feels nicer in the hand when grabbing it. That said: I’m a pretty big fellow.
(3) The elasticity (or possible percentage of elongation) of the rope is especially a factor in deep dives. Simply put: if the line is 100 meters long and has a possible 4% elongation that is a possible 4 meters extra you might unintentionally get. Of course the negative influence of this on your dive is very much dependant on the sort of bottom weight or anchoring you use and whether you have or have not taken this factor in consideration. Ideally, though, you have the least amount of elongation possible.
Last monday I went out diving with a buddy to properly test out the Apneaman Freediving Buoy. Or maybe it’s brand name is Apneautic; hard to say, but it deserves a mention here anyway.
I got the Apneaman Freediving Buoy a couple of months ago. I ordered the complete set with the buoy, inner bladder, 40 meters of rope, weight strap, carabiners and bottom plate. Mainly because it is very competitively priced.
I believe Apneaman is Martin Zajac’s company. Martin Zajac is a freediving athlete, coach, trainer and instructor from the Czech Republic and is competing at the Vertical Blue competition this year (held this and next week). I would imagine he can properly test (and stands behind) the gear he sells.
Since there is not a lot to find about this freediving buoy on the internet I decided to make an unboxing and first real use video about it (see below). “Firs real use” in the sense that I did use it once or twice before for some shallow and exploration dives.
As you can see in the video, the first buoy that arrived had a problem with the velcro. The Apneaman staff assured me this was something that happened rarely, if ever. Their service and understanding was exceptional and they sent out a new buoy within 24 hours. Not to mention that after I sent the faulty one back, they fully reimbursed my shipping costs. So… big props to Martin and the guys at Apneaman!
Now, to the diving. I took the complete set out; buoy, bladder, rope, bottom plate, weight strap, the whole lot. It was also a good opportunity to learn something about rope handing (line handling?). And well… that sh*t ain’t all that easy, guys! But I’m getting better at it and I plan to do a video about it soon.
My buddy (a PADI master freediver) and I swam to the furthest end of the dive zone at the Vinkeveense Plassen. We let down the rope with 9kg (+/- 20lbs) of lead attached until it touched the bottom. After we got the rope tight and right, we started warmin up.
We did some free immersion dives first, then some constant weight dives. In between we tried a couple of FRC dives. I tried FRC for the first time and went to 9.6m on it. It’s a strange sensation and you get to free fall very early. Also, FRC helps practising the right equalization technique, but comes with some risks and needs to be done with care and preferably with someone who can guide you through it.
I did the final constant weight dives with full lungs again and managed to reach the bottom plate! With which I also set a new personal best constant weight dive to 18.8 meters (61.6ft) of depth!
If you’ve been following this blog, you might wonder how I fared with equalizing at that depth. If you haven’t been following the blog: equalization didn’t come easy for me, as you might also be able to guess from the titles of some of my previous blog posts.
As with lots of acquired skills I believe it takes some time for the brain and body to realise what is expected of it. In that sense the old adagium “practice makes perfect” holds true for anything you want to become proficient at in life.
When you train regularly and your mind and body are getting used to float about deeper and deeper under the surface of any body of water (even if it’s green, dark and murky), you get more relaxed, you start to have more time to feel what is happening inside. This makes it possible to process new things and adapt.
Together with my buddy I figured out it I was sometimes slightly opening my glottis and transitioning back to valsalva equalization at a certain depth. So focusing on not doing that and sticking to the frenzel I got deeper and deeper more comfortably, until I reached the bottom plate.
I won’t lie to you and say that equalisation didn’t become more challenging near the end (as before it became more challenging near the previous “end”), but I didn’t feel any uncomfortable pressure or pain. And that’s how going a bit further every time and getting used to it, relaxing into it, is how we will creep a bit further away from the surface every time we practice. Slowly.
a journey from the surface to wherever 